The OnBoard Display is a module that is installed on your model. Using LED's, it allows for quick indication of the status of the TCU and indicates:

RPM out of limits, EGT out of limits, Shutdown, Ramping to idle, Running and Cooling.

RPM sensor board. This remote rev sensor is mounted in the bell mouth of the turbine with a magnetic washer installed on the shaft. It is sensitive enough to detect the magnet over a distance of up to 50 mm.

Standard magnetic sensor plus tiny rare earth magnets are available. Cable with connector can be supplied if required.

Infra red 'thru the hole' rev sensors are available. An I/R emitter and detector are supplied with cable harness.

Starter motor and bell mouth assembly suitable for MW54 turbines. The plastic inlet housing is replace with an aluminum one that supports the starter motor assembly.

Type K thermocouple. Spare thermocouples are available. Overall length is 150mm, special sizes can be made to suit.