Features:

• Optimum solar power conversion

• High mechanical strength

• Quick, secure mounting

• Electrical continuity under extreme temperature conditions

Cell Material & Configuration:  Optical Efficiency

Each module contains high quality monocrystalline silicon cells, in strings of  cells connected in series. Individual cells are treated with a patented anti-reflective coating for enhanced optical coupling and maximum efficiency.

Module Construction: Reliability

Cells are laminated in Ethylene Vinyl Acetate (EVA), and sandwiched between high transmission, impact resistant glass, and a moisture resistant Tedlar backing.  Lamination in EVA facilitates thermal expansion, provides moisture protection and ensures UV stability and electrical insulation.  Modules have bypass diodes for hot-spot prevention, avoiding damage in partly shaded conditions.

 Frame Construction: Mechanical Robustness

Modules have robust, extruded anodised aluminium frames, capable of withstanding wind loads of  up to 200km/hour.  A thin layer of silicon sealant is applied between the frame and the module, providing a further barrier against humidity, as well as a cushion against impact and thermal expansion.

Electrical Connection: Protection & Continuity

Modules are supplied with a waterproof IP65 junction box with sealed screw lid, 20mm knockout holes and compression glands for external electrical power cable feeds.  Electrical connection in the junction box is directly into screw terminals on the printed circuit board containing protective bypass diodes.

Physical Mounting: Speed  & Security

Modules are mounted in position via slotted  holes on the frame.  This provides quick, secure fixing of modules to the supporting structure.

Warranty: Continuous Operation

Modules have a typical design life of 20 years and are supplied with a 20 year limited power output warranty.