 |
|
1. Gate Frame
The gate frame is manufactured from square and rectangular steel tube with a 2mm wall thickness. For tube dimensions see below table
2. Bars
The bars are manufactured from round tube with a 2mm wall thickness spaced at 150mm intervals. For bar diameters see below table.
3. Hinges
Pintle hinges with anti-lift devices in the closed position are standard to all gates. Collared hinges are bolted or welded to the gate posts or base plates during manufacture depending on whether the gate is to be hung on gate posts or fixed to columns or walls.
4. Locking Devices
5.1 Double leaf gates are fitted with a special padlock locking device which also secure drop bolts when locked.
5.2 Single leaf gates are fitted with a padlock sliding bolt. A mortice lock can be fitted if specified.
5.3 Slam plates are fitted to closing posts for single leaf gates and on the female frame for double leaf gates.
5. Finish
All steel components are hot dip galvanised after manufacture to SABS 763 of 1977.
Single Bar Gates
| Type | Nom Height | Nom Width | Vert Frame | Hor Frame | Bar Diam | Post Diam (Hang) Dia | Post Diam (Close) Dia | a | b | Razor Comb |
| BS 1510 BS 1515 BS 1520 |
1500 | 1000 1500 2000 |
40 x 40 40 x 40 40 x 40 |
40 x 40 40 x 40 40 x 40 |
22 22 22 |
76 100 100 |
100 100 100 |
1115 1615 2115 |
1000 1500 2000 |
Opt |
| BS 1810 BS 1815 BS 1820 BS 1824 |
1800 | 1000 1500 2000 2400 |
40 x 40 40 x 40 40 x 40 40 x 40 |
60 x 40 60 x 40 60 x 40 60 x 40 |
27 27 27 27 |
76 100 114 114 |
76 100 100 100 |
1115 1615 2115 2515 |
1000 1500 2000 2000 |
Opt |
| BS 2010 BS 2015 BS 2020 BS 2024 |
2000 | 1000 1500 2000 2400 |
40 x 40 40 x 40 40 x 40 40 x 40 |
60 x 40 60 x 40 60 x 40 60 x 40 |
27 27 27 27 |
100 114 114 114 |
100 100 100 100 |
1115 1615 2115 2515 |
1000 1500 2000 2400 |
Fixed |
| BS 2210 BS 2215 BS 2220 BS 2224 |
2250 | 1000 1500 2000 2400 |
40 x 40 40 x 40 40 x 40 40 x 40 |
60 x 40 60 x 40 60 x 40 60 x 40 |
27 27 27 27 |
100 114 114 114 |
100 100 100 100 |
1115 1615 2115 2515 |
1000 1500 2000 2400 |
Fixed |
| BS 2510 BS 2515 BS 2520 |
2500 | 1000 1500 2000 |
40 x 40 40 x 40 40 x 40 |
60 x 40 60 x 40 60 x 40 |
32 32 32 |
100 114 114 |
100 100 100 |
1115 1615 2115 |
1000 1500 2000 |
Fixed |
| BS 3010 BS 3015 BS 3020 |
3000 | 1000 1500 2000 |
40 x 40 40 x 40 40 x 40 |
60 x 40 60 x 40 60 x 40 |
32 32 32 |
100 114 114 |
114 114 114 |
1115 1615 2115 |
1000 1500 2000 |
Fixed |
All measurements in mm
Back Catalogue